Part Number Hot Search : 
24F15E1 LHC12SB2 13N06 OM5320SR AAT11 6255T7LC MB15E03 CJ82A
Product Description
Full Text Search
 

To Download NHD-0224AZ-FL-YBW Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 User's Guide
NHD-0224AZ-FL-YBW
LCM
(Liquid Crystal Display Module)
RoHS Compliant
NHD0224AZFLYBWNewhaven Display 2 Lines x 24 Characters Version Line Transflective Yellow/Green LED B/L STN-Yellow/Green 6:00 View Wide Temperature (-20 ~ +70c)
For product support, contact
Newhaven Display International, LLC 2511 Technology Drive, #101 Elgin, IL 60124
Tel: (847) 844-8795 Fax: (847) 844-8796
November 26, 2008
NHD-0224AZ-FL-YBW DOCUMENT REVISION HISTORY
Version 00 DATE
May-20-2007
Newhaven Display
DESCRIPTION
First issue
CHANGED BY
CONTENTS Item
Functions & Features Mechanical specifications Dimensional Outline Absolute maximum ratings Block diagram Pin description Contrast adjust Optical characteristics Electrical characteristics Timing Characteristics Instruction description Display character address code: character pattern Quality Specifications
Page
3 3 4 5 5 5 6 6 6 7-8 9-12 12 13 14--21
2
NHD-0224AZ-FL-YBW 1.Features
1. 2. 3. 4. 5. 6. 7. 5x8 dots with cursor Built-in controller (S6A0069 or equivalent) +5V power supply 1/16 duty cycle;1/5bias BKL to be driven by pin15, pin16 16characters *2lines display LCD type View direction Rear Polarizer Backlight Type Backlight Color Temperature Range DC to DC circuit El Driver IC Touch screen Font type
Newhaven Display
FSTN positive FSTN Negative STN Yellow Green STN Gray 6 O'clock 12 O'clock Reflective Transflective LED EL Internal Power CCFL External Power White Amber Blue-Green Normal Wide Build-in Not Build-in Build-in Not Build-in With Without English-Jap English-Eur English-Russian anese open
STN-Blue Transmissive 5.0V input 3.3V input Yellow-Green Super Wide
other
2. MECHANICAL SPECIFICATIONS
Module size Viewing area Character size Character pitch Weight 118.0mm(L)*36.0mm(W)* Max12.5(H)mm 94.5mm(L)*18.0mm(W) 3.2mm(L)*5.55mm(W) 3.7mm(L)*5.95mm(W) Approx.
3
3.Outline dimension
1.0 First issue Feb-16-2006
PIN ASSIGNMENT
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 VSS VDD V0 RS RW E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 LED+ LED-
A
Front
DOTS DETAIL
K
SCALE=4.0:1
NHD-0224A-FL-YBW
Back
4.Absolute maximum ratings
Power voltage Input voltage Operating temperature range Storage temperature range Item Symbol VDD-VSS VIN VOP VST 0 VSS -20 -30 Standard 7.0 VDD +70 +80 Unit V
5.Block diagram
8. Interface pin description
Pin no.
1 2 3 4 5 6 7~10 11~14 15 16
Symbol VSS VDD V0
RS R/W E DB0~DB3 DB4~DB7 LED+ LED-
External connection
Power supply MPU MPU MPU MPU MPU Power supply
Function
Signal ground for LCM (GND) Power supply for logic (+5V) for LCM Contrast adjust Register select signal Read/write select signal Operation (data read/write) enable signal Four low order bi-directional three-state data bus lines. Used for data transfer between the MPU and the LCM. These four are not used during 4-bit operation. Four high order bi-directional three-state data bus lines. Used for data transfer between the MPU Power supply for LED backlight (+5V) Power supply for LED backlight (0V)
NHD-0224AZ-FL-YBW 7.Contrast adjust
Newhaven Display
VDD~V0: LCD Driving voltage VR: 10k~20k
8.Optical characteristics
STN type display module (Ta=25, VDD=5.0V) Item Viewing angle Contrast ratio Response time (rise) Response time (fall) Item Viewing angle Contrast ratio Response time (rise) Response time (fall) DC characteristics Parameter
Input voltage Supply current Input leakage current "H" level input voltage "L" level input voltage "H" level output voltage "L" level output voltage Backlight supply voltage
Symbol Cr Tr Tr Symbol Cr Tr Tr
Condition Cr3 Condition Cr3 -
Min. 10 -45 Min. -10
-45
Typ. 3 100 150 Typ. 5 100 150
Max. 60 45 150 200 Max. 60 45 150 200
Unit deg ms
FSTN type display module (Ta=25, VDD=5.0V) Unit deg ms
-
9.Electrical characteristics
Supply voltage for LCD
Symbol VDD-V0 VDD IDD ILKG VIH VIL VOH VOL VF
Conditions
Ta =25 Ta=25, VDD=5.0V
Min.
4.7 2.2 0 2.4 -
Typ.
4.6 5.0 1.5 5.0
Max.
5.5 2.5 1.0 VDD 0.6 0.4 -
Unit
V mA uA
Twice initial value or less LOH=-0.25mA LOH=1.6mA Ta =25
6
V
NHD-0224AZ-FL-YBW
Backlight supply current ILED
Newhaven Display
VF=5.0V
160 mA
10.Timing Characteristics
Write cycle (Ta=25, VDD=5.0V)
Enable cycle time Enable pulse width Enable rise/fall time RS; R/W setup time RS; R/W address hold time Read data output delay Read data hold time
Parameter
Symbol tc tw tr, tf tsu1 th1 tsu2 th2
Test pin
E RS; R/W RS; R/W DB0~DB7
Min.
500 300 100 10 60 10
Typ.
-
Max.
25 -
Unit
ns
Write mode timing diagram
VIH1 VIL1
tsu1
VIL1
th1
VIL1
tw
VIH1 VIL1 VIH1
th1 tf
VIL1 VIL1
tr
VIH1 VIL1
tsu2
VALID DATA
th2
VIH1 VIL1
tc
7
NHD-0224AZ-FL-YBW
Newhaven Display
Read cycle (Ta=25, VDD=5.0V)
Enable cycle time Enable pulse width Enable rise/fall time RS; R/W setup time RS; R/W address hold time Read data output delay Read data hold time
Parameter
Symbol tc tw tr, tf tsu th td tdh
Test pin
E RS; R/W RS; R/W DB0~DB7
Min.
500 300 100 10 60 20
Typ.
-
Max.
25 90 -
Unit
ns
Read mode timing diagram
VIH1 VIL1
tsu
th
VIL1
VIL1
tw
VIH1 VIL1 VIH1 VIL1
th tf
VIL1
tr
td
VIH1 VIL1 VALID DATA
tdh
VIH1 VIL1
tc
8
NHD-0224AZ-FL-YBW
Newhaven Display
11.Instruction description
11.1Outline To overcome the speed difference between the internal clock of S6A0069 and the MPU clock, S6A0069 performs internal operations by storing control in formations to IR or DR. The internal operation is determined according to the signal from MPU, composed of read/write and data bus (Refer to Table7). Instructions can be divided largely into four groups: 1) S6A0069 function set instructions (set display methods, set data length, etc.) 2) Address set instructions to internal RAM 3) Data transfer instructions with internal RAM 4) Others The address of the internal RAM is automatically increased or decreased by 1. Note: during internal operation, busy flag (DB7) is read "High". Busy flag check must be preceded by the next instruction. 11.2 Instruction Table Instruction code Instruction Clear Display Return Home Entry mode Set Display ON/ OFF control Cursor or Display shift Function set Set CGRAM Address Set DDRAM Address Read busy Flag and Address Write data to Address Read data From RAM
RS DB R/W DB7 DB6 5 DB DB4 DB3 DB2 1 DB0
Description
Write "20H" to DDRA and set DDRAM address to "00H" from AC Set DDRAM address to "00H" From AC and return cursor to Its original position if shifted. The contents of DDRAM are not changed. Assign cursor moving direction And blinking of entire display
Execution time (fosc= 270 KHZ
1.53ms
0
0
0
0
0
0
0
0
0
1
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0 0
0 0 0
0 0 0
0 0 1
0 1 D
1 I/D C
SH B
1.53ms
39us
0
0
0
0
0 0
0 0
0 1
1
Set display (D), cursor (C), and Blinking of cursor (B) on/off Control bit. Set cursor moving and display Shift control bit, and the 0 1 S/C R/L Direction, without changing of DDRAM data. Set interface data length (DL: 8Bit/4-bit), numbers of display 1 DL N F Line (N: =2-line/1-line) and, Display font type (F: 5x11/5x8) Set CGRAM address in AC5 AC4 AC3 AC2 AC1 AC0 address Counter. Set DDRAM address in
39us
39us
39us
AC6 AC5 AC4 AC3 AC2 AC1 AC0 address
Counter.
39us
0
1
BF
1 1
0 1
D7 D7
Whether during internal Operation or not can be known AC6 AC5 AC4 AC3 AC2 AC1 AC0 By reading BF. The contents of Address counter can also be read. Write data into internal RAM D6 D5 D4 D3 D2 D1 D0 (DDRAM/CGRAM).
0us
43us 43us
D6
D5
D4
D3
D2
9
D1
D0
Read data from internal RAM (DDRAM/CGRAM).
NHD-0224AZ-FL-YBW
Newhaven Display
NOTE: When an MPU program with checking the busy flag (DB7) is made, it must be necessary 1/2fosc is necessary for executing the next instruction by the falling edge of the "E" signal after the busy flag (DB7) goes to "Low". 11.3Contents 1) Clear display RS R/W 0 0
DB7 0
DB6 0
DB5 0
DB4 0
DB3 0
DB2 0
DB1 0
DB0 1
Clear all the display data by writing "20H" (space code) to all DDRAM address, and set DDRAM address to "00H" into AC (address counter). Return cursor to the original status, namely, bring the cursor to the left edge on the fist line of the display. Make the entry mode increment (I/D="High"). 2) Return home RS R/W DB7 DB6 DB5 DB4 DB3 DB2 0 0 0 0 0 0 0 0 Return home is cursor return home instruction. Set DDRAM address to "00H" into the address counter. Return cursor to its original site and return display to its original status, if shifted. Contents of DDRAM does not change. Entry mode set RS R/W 0 0 DB7 0 DB6 0 DB5 0 DB4 0 DB3 0 DB2 1 DB1 1 DB0 -
3)
DB1 I/D
DB0 SH
Set the moving direction of cursor and display. I/D: increment / decrement of DDRAM address (cursor or blink) When I/D="high", cursor/blink moves to right and DDRAM address is increased by 1. When I/D="Low", cursor/blink moves to left and DDRAM address is increased by 1. *CGRAM operates the same way as DDRAM, when reading from or writing to CGRAM. SH: shift of entire display When DDRAM read (CGRAM read/write) operation or SH="Low", shifting of entire display is not performed. If SH ="High" and DDRAM write operation, shift of entire display is performed according to I/D value. (I/D="high". shift left, I/D="Low". Shift right). Display ON/OFF control RS R/W DB7 DB6 DB5 0 0 0 0 0 Control display/cursor/blink ON/OFF 1 bit register. 4) DB4 0 DB3 1 DB2 D DB1 C DB0 B
D: Display ON/OFF control bit When D="High", entire display is turned on. When D="Low", display is turned off, but display data remains in DDRAM. C: cursor ON/OFF control bit When D="High", cursor is turned on. When D="Low", cursor is disappeared in current display, but I/D register preserves its data. B: Cursor blink ON/OFF control bit When B="High", cursor blink is on, which performs alternately between all the "High" data and display characters at the cursor position. When B="Low", blink is off. 5) Cursor or display shift RS R/W DB7 DB6 DB5
10
DB4
DB3
DB2
DB1
DB0
NHD-0224AZ-FL-YBW
Newhaven Display
-
0 0 0 0 0 1 S/C R/L Shifting of right/left cursor position or display without writing or reading of display data. This instruction is used to correct or search display data. During 2-line mode display, cursor moves to the 2nd line after the 40th digit of the 1st line. Note that display shift is performed simultaneously in all the lines. When display data is shifted repeatedly, each line is shifted individually. When display shift is performed, the contents of the address counter are not changed. Shift patterns according to S/C and R/L bits S/C 0 0 1 1 6) R/L 0 1 0 1 Operation Shift cursor to the left, AC is decreased by 1 Shift cursor to the right, AC is increased by 1 Shift all the display to the left, cursor moves according to the display Shift all the display to the right, cursor moves according to the display DB7 0 DB6 0 DB5 1 DB4 DL DB3 N DB2 F DB1 -
Function set RS R/W 0 0
DB0 -
DL: Interface data length control bit When DL="High", it means 8-bit bus mode with MPU. When DL="Low", it means 4-bit bus mode with MPU. Hence, DL is a signal to select 8-bit or 4-bit bus mode. When 4-but bus mode, it needs to transfer 4-bit data twice. N: Display line number control bit When N="Low", 1-line display mode is set. When N="High", 2-line display mode is set. F: Display line number control bit When F="Low", 5x8 dots format display mode is set. When F="High", 5x11 dots format display mode. 7) Set CGRAM address RS R/W DB7 0 0 0 DB6 1 DB5 AC5 DB4 AC4 DB3 AC3 DB2 AC2 DB1 AC1 DB0 AC0
Set CGRAM address to AC. The instruction makes CGRAM data available from MPU. 8) Set DDRAM address RS R/W DB7 0 0 1 DB6 AC6 DB5 AC5 DB4 AC4 DB3 AC3 DB2 AC2 DB1 AC1 DB0 AC0
Set DDRAM address to AC. This instruction makes DDRAM data available form MPU. When 1-line display mode (N=LOW), DDRAM address is form "00H" to "4FH".In 2-line display mode (N=High), DDRAM address in the 1st line form "00H" to "27H", and DDRAM address in the 2nd line is from "40H" to "67H". 9) Read busy flag & address RS R/W DB7 0 1 BF DB6 AC6 DB5 AC5 DB4 AC4 DB3 AC3 DB2 AC2 DB1 AC1 DB0 AC0
This instruction shows whether S6A0069 is in internal operation or not. If the resultant BF is "High", internal operation is in progress and should wait BF is to be LOW, which by then the nest instruction can be performed. In this instruction you can also read the value of the address counter. 10) Write data to RAM
11
NHD-0224AZ-FL-YBW
RS 1 R/W 0 DB7 D7 DB6 D6 DB5 D5 DB4 D4 DB3 D3
Newhaven Display
DB2 D2 DB1 D1 DB0 D0
Write binary 8-bit data to DDRAM/CGRAM. The selection of RAM from DDRAM, and CGRAM, is set by the previous address set instruction (DDRAM address set, CGRAM address set). RAM set instruction can also determine the AC direction to RAM. After write operation. The address is automatically increased/decreased by 1, according to the entry mode. 11) Read data from RAM RS R/W DB7 1 1 D7 DB6 D6 DB5 D5 DB4 D4 DB3 D3 DB2 D2 DB1 D1 DB0 D0
Read binary 8-bit data from DDRAM/CGRAM. The selection of RAM is set by the previous address set instruction. If the address set instruction of RAM is not performed before this instruction, the data that has been read first is invalid, as the direction of AC is not yet determined. If RAM data is read several times without RAM address instructions set before, read operation, the correct RAM data can be obtained from the second. But the first data would be incorrect, as there is no time margin to transfer RAM data. In case of DDRAM read operation, cursor shift instruction plays the same role as DDRAM address set instruction, it also transfers RAM data to output data register. After read operation, address counter is automatically increased/decreased by 1 according to the entry mode. After CGRAM read operation, display shift may not be executed correctly. NOTE: In case of RAM write operation, AC is increased/decreased by 1 as in read operation. At this time, AC indicates next address position, but only the previous data can be read by the read instruction.
12.Display character address code:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4E 16 0F 4F
12
NHD-0224AZ-FL-YBW 13.Standard character pattern
Newhaven Display
13
NHD-0224AZ-FL-YBW 14.QUALITY SPECIFICATIONS 14.1 Standard of the product appearance test
Newhaven Display
Manner of appearance test: The inspection should be performed in using 20W x 2 fluorescent lamps. Distance between LCM and fluorescent lamps should be 100 cm or more. Distance between LCM and inspector eyes should be 30 cm or more. Viewing direction for inspection is 45 from vertical against LCM.
Fluorescent Lamps 30cm
o 45 o 45 min
100cm min
LCM
LCD
Definition of zone:
A Zone B Zone A Zone: Active display area (minimum viewing area). B Zone: Non-active display area (outside viewing area).
14
NHD-0224AZ-FL-YBW 14.2 Specification of quality assurance
AQL inspection standard
Newhaven Display
Sampling method: MIL-STD-105E, Level II, single sampling Defect classification (Note: * is not including)
Classify Major Display state
Item Short or open circuit LC leakage Flickering No display Wrong viewing direction Contrast defect (dim, ghost) Back-light Non-display Flat cable or pin reverse Wrong or missing component
Note 1
AQL 0.65
2 1,8 10 11 2 3 4 5 6 7 1.0
Minor
Display state
Background color deviation Black spot and dust Line defect, Scratch Rainbow Chip Pin hole Protruded
12 3 9 10 13
Polarizer Soldering Wire TAB
Bubble and foreign material Poor connection Poor connection Position, Bonding strength
15
NHD-0224AZ-FL-YBW
Note on defect classification
Newhaven Display
Criterion Not allow
No. 1
Item Short or open circuit LC leakage Flickering No display Wrong viewing direction Wrong Back-light
2
Contrast defect Background deviation color
Refer to approval sample
3
Point defect, Black spot, dust (including Polarizer)
Y X
Point Size <0.10 0.10<0.20
Acceptable Qty.
Disregard 3 2 1 Unitmm 0
= (X+Y)/2
0.20<0.25 0.25<0.30 >0.30
4
Line defect, Scratch
L
W L --3.0L 2.0L 1.0L
---
Line W 0.015W 0.03W 0.05W 0.1W
0.05Acceptable Qty.
Disregard 2 1
Applied as point defect
Unit: mm 5 Rainbow Not more than two color changes across the viewing area.
16
NHD-0224AZ-FL-YBW
No 6 Chip
X
Newhaven Display
Criterion Acceptable criterion
Y
Item
Remark: X: Length direction Y: Short direction Z: Thickness direction t: Glass thickness W: Terminal Width
X t 2
Y 0.5mm
Z t/2
Z
X
Acceptable criterion
Y
X 2
Y 0.5mm
Z t
Z
Acceptable criterion X Y X Y Z t 3 2 shall not reach to ITO
W
Acceptable criterion
Y
Z X
X Disregard
Y 0.2
Z t
Y
Acceptable criterion X Y 5 2
Z t/3
X
Z
17
NHD-0224AZ-FL-YBW
No. 7 Item Segment pattern W = Segment width = (X+Y)/2 (1) Pin hole < 0.10mm is acceptable. X
X
Newhaven Display
Criterion
Point Size 1/4W 1/4W< 1/2W 1/2W
Y Y W 8 Back-light (1) The color of specification.
Acceptable Qty Disregard 1 0 Ui
backlight
should
correspond
its
9
Soldering
(2) Not allow flickering (1) Not allow heavy dirty and solder ball on PCB. (The size of dirty refer to point and dust defect) (2) Over 50% of lead should be soldered on Land.
Lead Land 50% lead
10
Wire
(1) Copper wire should not be rusted (2) Not allow crack on copper wire connection. (3) Not allow reversing the position of the flat cable. (4) Not allow exposed copper wire inside the flat cable. (1) Not allow screw rust or damage. (2) Not allow missing or wrong putting of component.
11*
PCB
18
NHD-0224AZ-FL-YBW
No 12 Item Protruded W: Terminal Width Criterion
Newhaven Display
W
Acceptable criteria:
Y
Y 0.4
X 13 TAB 1. Position W H H1 2 TAB bonding strength test F TAB W1 ITO W11/3W H11/3H
TAB
P (=F/TAB bonding width) 650gf/cm ,(speed rate: 1mm/min) 5pcs per SOA (shipment) 14 Total no. of acceptable Defect
A. Zone Maximum 2 minor non-conformities per one unit. Defect distance: each point to be separated over 10mm B. Zone It is acceptable when it is no trouble for quality and assembly in customer's end product.
19
NHD-0224AZ-FL-YBW 14.3 Reliability of LCM
Reliability test condition: Item Condition 80C 70C -30C -20C 40C/ 90%RH 0C 25C 50C (30 min 5 min 30min)
Newhaven Display
Time (hrs) 48 48 48 48 48 10cycles No abnormalities in functions and appearance Assessment
High temp. Storage
High temp. Operating Low temp. Storage Low temp. Operating Humidity Temp. Cycle
Recovery time should be 24 hours minimum. Moreover, functions, performance and appearance shall be free from remarkable deterioration within 50,000 hours under ordinary operating and storage conditions room temperature (20+8C), normal humidity (below 65% RH), and in the area not exposed to direct sun light.
14.4 Precaution for using LCD/LCM
LCD/LCM is assembled and adjusted with a high degree of precision. Do not attempt to make
any alteration or modification. The followings should be noted. General Precautions: 1. LCD panel is made of glass. Avoid excessive mechanical shock or applying strong pressure onto the surface of display area. 2. The polarizer used on the display surface is easily scratched and damaged. Extreme care should be taken when handling. To clean dust or dirt off the display surface, wipe gently with cotton, or other soft material soaked with isoproply alcohol, ethyl alcohol or trichlorotriflorothane, do not use water, ketone or aromatics and never scrub hard. 3. Do not tamper in any way with the tabs on the metal frame. 4. Do not make any modification on the PCB without consulting Newhaven Display 5. When mounting a LCM, make sure that the PCB is not under any stress such as bending or twisting. Elastomer contacts are very delicate and missing pixels could result from slight dislocation of any of the elements. 6. Avoid pressing on the metal bezel, otherwise the elastomer connector could be deformed and lose contact, resulting in missing pixels and also cause rainbow on the display.
7. Be careful not to touch or swallow liquid crystal that might leak from a damaged cell. Any liquid crystal adheres to skin or clothes, wash it off immediately with soap and water.
Static Electricity Precautions:
1. CMOS-LSI is used for the module circuit; therefore operators should be grounded whenever he/she comes into contact with the module. 2. Do not touch any of the conductive parts such as the LSI pads; the copper leads on the PCB and the interface terminals with any parts of the human body. 3. Do not touch the connection terminals of the display with bare hand; it will cause disconnection or
20
NHD-0224AZ-FL-YBW
4. 5. 6. 7.
Newhaven Display
defective insulation of terminals. The modules should be kept in anti-static bags or other containers resistant to static for storage. Only properly grounded soldering irons should be used. If an electric screwdriver is used, it should be grounded and shielded to prevent sparks. The normal static prevention measures should be observed for work clothes and working benches. 8. Since dry air is inductive to static, a relative humidity of 50-60% is recommended.
Soldering Precautions: 1. Soldering should be performed only on the I/O terminals.
2. 3. 4. 5. 6. 7.
Use soldering irons with proper grounding and no leakage. Soldering temperature: 280C+10C Soldering time: 3 to 4 second. Use eutectic solder with resin flux filling. If flux is used, the LCD surface should be protected to avoid spattering flux. Flux residue should be removed. 1. The viewing angle can be adjusted by varying the LCD driving voltage Vo. 2. Since applied DC voltage causes electro-chemical reactions, which deteriorate the display, the applied pulse waveform should be a symmetric waveform such that no DC component remains. Be sure to use the specified operating voltage. 3. Driving voltage should be kept within specified range; excess voltage will shorten display life. 4. Response time increases with decrease in temperature. 5. Display color may be affected at temperatures above its operational range.
6.
Operation Precautions:
7.
and humidity could cause polarization degradation, polarizer peel-off or generate bubbles. For long-term storage over 40C is required, the relative humidity should be kept below 60%,and avoid direct sunlight.
Keep the temperature within the specified range usage and storage. Excessive temperature
Limited Warranty
Newhaven Display LCDs and modules are not consumer products, but may be incorporated by Newhaven Display's customers into consumer products or components thereof, Newhaven Display does not warrant that its LCDs and components are fit for any such particular purpose. 1. The liability of Newhaven Display is limited to repair or replacement on the terms set forth below. Newhaven Display will not be responsible for any subsequent or consequential events or injury or damage to any personnel or user including third party personnel and/or user. Unless otherwise agreed in writing between Newhaven Display and the customer, Newhaven Display will only replace or repair any of its LCD which is found defective electrically or visually when inspected in accordance with Newhaven Display general LCD inspection standard . (Copies available on request) No warranty can be granted if any of the precautions state in handling liquid crystal display above has been disregarded. Broken glass, scratches on polarizer mechanical damages as well as defects that are caused accelerated environment tests are excluded from warranty. In returning the LCD/LCM, they must be properly packaged; there should be detailed description of the failures or defect.
2. 3.
21


▲Up To Search▲   

 
Price & Availability of NHD-0224AZ-FL-YBW

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X